Three Connections for Different Applications

Dual Lead - Two thin wire leads for hanging mirrors or mirrors installed with clips

Non-sheathed - ROMEX type wire connection for mirrors attached with mastic or large quantity installations

Plug - An A.L.C.I. cordset (like a hair dryer safety plug) for hanging mirrors, mirrors installed with clips, large quantity installations or existing outlet use.

ClearMirror™ Plug

The ClearMirror™ Plug connects by a "plug" to integrate preparation and error-free product installation between customer, electrician, drywall contractor and mirror installer. The Plug is an A.L.C.I. cordset similar to the safety plug on a hairdryer. The plug version is simply installed to the back of a mirror through the use of pressure sensitive adhesives with a simple "peel and stick" application.

The ClearMirror™ Dual Lead

The ClearMirror™ Dual Lead is designed to be direct wired to a remodel box behind the mirror. If doubts arise concerning the electrical connection, consult a qualified electrician.

The ClearMirror™ Non-Sheathed Cable

Quick guest bathroom installation and permanently affixed mirrors is the plan for this connection. The "Need for Speed " design is the only UL and C-UL listed mirror heater using a non-sheathed cable to connect direct to the circuit. Simply make a small cutout in the sheetrock and run the 14-gauge cable direct into the overhead light junction.