HS 3837 BF [1½" threshold] shower

Hydro Systems HS 3837 BF [1½" threshold] shower with phenolic seat.

We have (4) left hand showers available as of 01-09-08. Call for availablitiy and shipping fees.

Sold without shower heads.

Overall Dimensions Installed: 38"W x 37"D x 77" H

Gel Coat Finish

Flame spread rating of 200 or less

Smoke density rating of 450 or less per ASTM E84

Galvanized steel reinforced stiffeners

Extra reinforcing in all critical areas

Slip resistant floor

Soap dish

16" x 30" Satin finish stainless steel grab bar

horizontally mounted

Choice of Naughahyde over foam rubber or a hard

phenolic folding wheelchair transfer seat, factory installed

36" Satin finish stainless steel curtain rod, installed

Drain is brass body, self-caulking with stainless steel strainer

Unit is packaged in cardboard box on forklift pallet

Full LTL wooden shipping crate available as an option

Hydro Systems HS 3837 BF [1½" threshold] shower with 5 year limited warranty, 38" Wide x 37" Deep x 77" High with folding wheelchair transfer seat conforming to ADA accessibility standards, 1" O.D. satin finish stainless steel curtain rod, 16" x 30" satin finish stainless steel grab bar on wet wall and rear wall, one soap dish on wet wall, center drain with center sloping integrally molded slip-resistant floor.

Units shall be molded of gel-coated fiberglass reinforced polyester resin.

Units shall meet or exceed physical and performance requirement for Type 2 gel-coated fixtures [of ANSI Z124.2 showers].

Standing/walking surfaces shall meet slip-resistance requirements of Consumer Safety Specification ASTM F-462, with static friction coefficient no less than 0.04.

Handicapped grab bars shall be nom. 1½" O.D. and support a minimum load of 250lbs. in accordance with the Consumer Safety Specification ASTM F-446 and ANSI A117.1 guidelines.

Units shall have a flame spread rating of 200 or less and a smoke density rating of 450 or less per ASTM E84.

Units shall bear or have a fixed to them a molded manufacturer's logo and/or permanent label showing manufacturer's name and model number and the seal of the Uniform Plumbing Code and shall be accompanied by detailed installation recommendations.