Purchase 3" Retro-Spin Flashings

A Retro-Spin® Flashing assembly is constructed (one each) of a tightly fitted interior, and exterior, impact extruded roof jacks. The patented Retro-Spin® design enables the interior flashing to rotate freely within the confines of the exterior flashing. Pre-punched access slots are cut through the sides of the two flashings creating a “Door” that is opened, and closed, via the spin action allow for its design. Retro-Spin® Flashings waterproof roof penetrations by using their closing door technology that allows for “Slip from the Side” retro-fit installations. Choose the Retro-Spin® Flashings design that is large enough for a roof penetration to pass through the open slot, enter the conical interior of the jack, and allow the flashing to rotate, or spin, closed without obstruction. Hand tools are not needed (used) when placing a Retro-Spin® Flashing around a roof penetration.

Single Flashing

United States Patent Number - 7,770,335

Please call All Style Industries LLC for any help with specifications 805-557-1225

3" Retro-Spin Flashing - Each

Retro-Spin® Flashings are fabricated from single sheets of metal with no attachment seams. The flashings conical cones are three inches high. A four inch horizontal flange, or skirt, is formed to allow final attachment within the roofing system. The diameter of the conical opening of a Retro-Spin® Flashing can be three or six inches respectively. A variety of pipe sizes and geometric shapes can be flashed, and waterproofed, using the “Slip from the Side” design of a Retro-Spin® Flashing.

Retro-Spin Flashings - 6 pack